13.56MHz Micro-power Modbus RTU 485 Communication rfid embedded reader for Factory Automation

Basic Information:

Product Features:

Support Modbus communication mode,Convenience to interface with various PLCs.

Integrated design,easy to installation and deployment.

With high sensitive read-write performance.

With IP67 protection grade can adapt to harsh environments.

Built-in-one design,have strong anti-interference ability to EMC.

Specification of Integrated rfid reader:
 

Product Application:

Trace systems for decentralized identification of products and goods.
 

Logistics Automation

The combination of decentralized solutions for I/O, safety, identification and control with IP67 rating makes us be your ideal partner for automating logistics processes.
 

Engine Assembly Line

The reader can interface with various PLCs such as Siemens,Schneider and Mitsubishi through the industrial bus controller. By reading the RFID tag mounted on the tray,passing the information to the PLC, Through the information of installation to guide the assembly robot or the assembler to auto select the appropriate part,the engine assembly efficiency can be greatly improved.
 

Power Battery Assembly

Install the reader at the RFID collection point, and the on-line station collection point reads the RFID tag in the material box to obtain the information of slots in the material box (each slot is equipped with a cell with different voltage), The voltage value/grade of the test cell is written into the material box RFID tag at the test station of the voltage cell. When the cell is classified, read the RFID tag information of the material box and connect the robot in real time to automaticaly put the cell into the corresponding cell transport track. After the robot takes down the cell with different gear from the transport track and puts them into the same material box it will write the cell gear information into the RFID tag of the material box. Through the operation of each station on the RFID tag, a series of processes such as cell division, transportation, encapsulation, and assembly are completed in the process of cell assembly.

Dimension Drawing(mm):
 

Installation Instruction:
 

The product comes with M18*45mm thread. When fixing, use two nuts to clamp on the site,or fixed in place by twisting. If the application environment is not allow, we can support bracket to install.

When there are more than two readers to be installed, the distance between the readers needs to be greater than 850mm.